Plugable USB2-HDMI-165 USB to HDMI Video and Audio Adapter for PC to TV 720p (DisplayLink DL-165 chip)

Use your HDMI TV as an extra display, even with older PCs and laptops without a built-in HDMI connector. This adapter adds HDMI connectivity via any available USB 2.0 port. Enables a single HDMI cable to carry both USB graphics and USB audio to your HDMI TV or monitor with speakers, or other HDMI audio/video receiver. Uses USB graphics chips and drivers from DisplayLink and standard USB audio drivers already built into Windows.

Requirements

Windows XP, Vista, Windows 7, or later required, with 2 Ghz dual core or better CPU recommended. Mac and Linux are not supported at this time. USB graphics devices with drivers from different chipset vendors (MCT, SMSC, DisplayLink, etc.) should not be mixed on the same system.

Performance

Sets modes up to 1920x1080 (1080p), however we recommend users set manually set Windows to 720p (1280x720) or lower for best video playback performance. Above this mode, framerates will be limited by the USB 2.0 connection.

Included in package

Main HDMI adapter unit, USB 2.0 cable for connecting back to PC, driver CD, and quickstart guide. Assumes use of a standard HDMI 19-pin male connector between adapter and TV (HDMI cable not included).